E-beam is one of those terms that cable engineers mention often but rarely stop to explain. In cable manufacturing, e-beam refers to electron beam crosslinking...
READ MOREThis product is composed of polyolefin resin, complex high-efficiency flame retardants, flame retardant synergists, carbonization agents, antioxidants, and additives. After mixing, it is granulated by twin-screw and meets the requirements of high flame retardancy, low toxicity of smoke, low corrosiveness, and no dripping or cracking resistance. It is suitable for cables of various specifications. Complies with the B1 and B2 level classification combustion standards in GB 31247-2014 and the B1ca, B2ca, and Cca level classification combustion standards in EN13501-6.
| No. | Item | Unit | Standard | Typical values | ||||
| DS-WDZH-B1 | DS-WDZH-X-B1 | DS-WDZH-W-B1 | DS-WDZH-B2 | |||||
| 1 | Density | g/cm³ | / | 1.56 | 1.57 | 1.56 | 1.54 | |
| 2 | Tensile strength | MPa | ≥10.0 | 12 | 12 | 12 | 12 | |
| 3 | Elongation at break | % | ≥160 | 170 | 170 | 170 | 170 | |
| 4 | Oxygen index | % | ≥30 | 38 | 40 | 42 | 38 | |
| 5 | Air thermal aging 100℃*168h |
Change rate of tensile strength | % | ±25 | +10 | +8 | +7 | +11 |
| Elongation rate of change | % | ±25 | -7 | -6 | -5 | -10 | ||
| 6 | Thermal denaturation | % | ≤50 | 10 | 9 | 9 | 11 | |
| 7 | Thermal shock resistance | / | No cracking | No cracking | No cracking | No cracking | No cracking | |
| 8 | Smoke density | Flaming | / | ≤100 | 70 | 67 | 62 | 75 |
| Flameless | / | ≤350 | 210 | 206 | 198 | 223 | ||
| 9 | Volume resistivity at 20℃ | Ω·cm | 1.0×10^12 | 1.4×10^13 | 1.4×10^13 | 1.3×10^13 | 1.5×10^13 | |
| 10 | Ozone resistance test | / | No cracking | No cracking | No cracking | No cracking | No cracking | |
| 11 | Low temperature brittleness temperature | ℃ | -25 | Pass | Pass | Pass | Pass | |
| 12 | pH | / | ≥4.3 | 5.2 | 5.1 | 5.2 | 5.1 | |
| 13 | HCl and HBr content | % | ≤0.5 | <0.5 | <0.5 | <0.5 | <0.5 | |
| 14 | Conductivity | μS/mm | ≤10 | 1.1 | 1.1 | 1.1 | 1.1 | |
E-beam is one of those terms that cable engineers mention often but rarely stop to explain. In cable manufacturing, e-beam refers to electron beam crosslinking...
READ MOREOpen almost any modern cable specification and you will run into four letters that carry an outsized amount of responsibility: HFFR. The abbreviation stands fo...
READ MOREIf you have ever watched a cable extrusion line run, you know that the real magic happens after the polymer leaves the die. For polyolefin cable compounds, one...
READ MOREEvery cable makes the same quiet promise: keep the current inside the conductor and keep everything else outside. The layer that carries that promise is the ca...
READ MOREAsk ten engineers what a TPE compound is and you will get ten slightly different answers, because the term describes a broad family of materials rather than a ...
READ MORE